Viking Retro-Fit Mounting Bracket |
| (Model # VE-RMB) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications and availability without prior notice. The VE-RMB attaches to the junction box supplied with Viking doorboxes and allows installation into existing walls. The bracket is screwed to the back of the junction box and provides a means of mounting even when no wall stud or support beam is accessible.
Simply drill a 1/4 inch hole in the back of the junction box, and use the screw provided to attach the bracket to the box.After cutting a hole in the wall, slip the assembly through the hole and tighten the screw. No need to find a wall stud or support beam!
Features:
- Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
- Junction Box Requirement: Use with the Viking 102mm x 102mm x 51mm (4” x 4” x 2”) plastic box, part number: 259576
- Minimum Wall Cavity Depth: 83mm (3.25”)
- Minimum Wall Thickness: 3.2mm (0.125”)
- Maximum Wall Thickness: 19mm (0.75”)
| |
|
Email Page
